A-A-2094 - Tape, Insulation, Electrical (Friction) (See Notice 1 Of Cancellation For Replacement Information)
This description covers cotton impregnated, adhesive, electrical insulation tape intended for protecting and binding in place, insulation applied to joints of wires and cables.
A-A-55128 - Insulator, Spreader
The insulator is used to separate or hold apart suspended free swinging electrical conductors.
A-A-56023 - Insulating Compound, Electrical, Silicone Rubber, Room Temperature Vulcanizing
This commercial item description (CID) covers four types of room temperature vulcanizing, silicone rubber electrical insulating compounds. The insulating compounds are intended for use in potting and encapsulating electrical and electronic components.
HH-C-471 - Cloth And Tape, Cotton, Varnished (For Electrical Insulation)
HH-I-00536 - (
Images) Insulation, Electrical, Mica, Natural Muscovite
This specification covers natural muscovite block mica in the full-or partially-trimmed sheet form for use as electrical insulation.
HH-I-435 - ( Images) Insulator, Electric, Porcelain And Glass (S/S By Ansi-C29.1-C29.6)
HH-I-510 - Insulation Tape, Electrical, Friction (S/S A-A-2094)
HH-I-536 - ( Images) Insulation Sheet, Electrical, Natural Muscovite Mica (S/S By Astm-D351)
Natural-muscovite-micca electrical insulation covered by this specification shall be class NM natural block mica.
HH-I-553 - Insulation Tape, Electrical, (Rubber, Natural And Synthetic) (S/S By Astm-D4388)
This specification covers rubber insulating tape for splicing wires and cables operating at both normal and high voltages.
HH-I-595 - Insulation Tape, Electrical, Pressure Sensitive Adhesive, Plastic (S/S By A-A-55809)
HH-T-101 - Tape, Friction (S/S By Hh-I-510)
HH-T-111 - Tape, Rubber (Natural And Synthetic), Insulating (Use Hh-I-553)
JAN-I-12 - Insulating Materials, Ceramic Radio Dielectric, Class H
JAN-I-21 - Insulators, Porcelain, Radio (S/S By Mil-I-23264)
JAN-I-7 - Insulators, Glass-Bonded-Mica, Radio (S/S By Mil-I-23264)
JAN-I-8 - Insulators, Steatite, Radio (S/S By Mil-I-23264)
JAN-I-9 - Insulators, Glass, Radio (S/S By Mil-I-23264)
MIL-C-12557 - Compound, Potting (Chatterton Compound)
MIL-C-12762 - Compound, Potting (Bituminous Plastic)
MIL-C-46878 - Coloring Compound, Carbon Black
MIL-C-46880 - Coating Compound, Synthetic Resin
MIL-C-46881 - Coating, Transparent, Epoxy Resin
MIL-C-47002 - Coating, Polyurethane, Single Component System
This specification covers the requirements for a polyurethane, single component coating and encapsulation system compound.
MIL-C-47003 - Curing Agent, Silicone Rubber
MIL-C-47054 - Compound, Potting, Unfilled, Flexible, Solid Polyurethane (Use Mil-P-47298)
MIL-C-47097 - Coating, Two Part, Epoxy Resin Base, Clear
MIL-C-47102 - Coating, Polyurethane, For Electronic Components, Metals, And Plastics (S/S By Mil-I-46058)
MIL-C-47150 - Compound, Coating, Porcelain For Potting Electronic Components
This specification covers the requirements for one type of porcelain casting compound used for potting electronic components.
MIL-C-47153 - Compound, Insulating, Potting And Encapsulating, Epoxy Resin
MIL-C-47200 - Compound, Coating, Polyurethane, Electrical Insulating, Room Temperature Cure (S/S By Mil-I-46058)
This specification covers the requirements for a room-temperature curing, polyurethane compound suitable for coating printed wiring and electronic assemblies.
MIL-C-47233 - Compound, Insulating, Electrical, Embedding, Material And Procedure For
MIL-C-47272 - Compound, Epoxy, Electrical Insulating
MIL-DTL-23053/10 - Insulation Sleeving, Electrical, Heat Shrinkable, Silicone Rubber, Flexible (S/S By Sae-Ams-Dtl-23053/10)
MIL-DTL-23053/11 - Insulation Sleeving, Electrical, Heat Shrinkable, Fluorinated Ethylene Propylene, Non-Crosslinked (S/S By Sae-Ams-Dtl-23053/11)
MIL-DTL-23053/12 - Insulation Sleeving, Electrical, Heat Shrinkable, Polytetrafluoroethylene (S/S By Sae-Ams-Dtl-23053/12)
MIL-DTL-23053/13 - Insulation Sleeving, Electrical, Heat Shrinkable, Fluoroelastomer, Flexible (S/S By Sae-Ams-Dtl-23053/13)
MIL-DTL-23053/14 - Insulation Sleeving, Electrical, Heat Shrinkable, Ethylene-Tetrafluoroethylene Fluoropolymer, Semi-Rigid (S/S By Sae-Ams-Dtl-23053/14)
MIL-DTL-23053/15 - Insulation Sleeving, Electrical, Heat Shrinkable, Polyolefin, Heavy-Wall, Coated, Flexible, Outer Wall Crosslinked (S/S By Sae-Ams-Dtl-23053/15)
MIL-DTL-23053/16 - Insulation Sleeving, Electrical, Heat Shrinkable, Crosslinked, Elastomeric Polyolefin, Flexible (S/S By Sae-Ams-Dtl-23053/16)
MIL-DTL-23053/17 - Insulation Sleeving, Electrical, Heat Shrinkable, Flame Retarded, Modified Polyolefin, Flexible, Crosslinked (S/S By Sae-Ams-Dtl-25053/17)
MIL-DTL-23053/1 - Insulation Sleeving, Electrical, Heat Shrinkable, Crosslinked Chlorinated Polyolefin, Flexible (S/S By Sae-Ams-Dtl-23053/1)
MIL-DTL-23053/4 - Insulation Sleeving, Electrical, Heat Shrinkable, Polyolefin, Dual-Wall, Outer Wall Crosslinked (S/S By Sae-Ams-Dtl-23053/4)
MIL-DTL-23053/5 - Insulation Sleeving, Electrical, Heat Shrinkable, Polyolefin, Flexible, Crosslinked (S/S By Sae-Ams-Dtl-23053/5)
MIL-DTL-23053/6 - Insulation Sleeving, Electrical, Heat Shrinkable, Polyolefin, Semi-Rigid, Crosslinked (S/S By Sae-Ams-Dtl-23053/6)
MIL-DTL-23053/7 - Insulation Sleeving, Electrical, Heat Shrinkable, Polyethylene Terephthalate, Non-Crosslinked (S/S By Sae-Ams-Dtl-23053/7)
MIL-DTL-23053/8 - Insulation Sleeving, Electrical, Heat Shrinkable, Polyvinylidene Fluoride, Semi-Rigid, Crosslinked (S/S By Sae-Ams-Dtl-23053/8)
MIL-DTL-23053 - Insulation Sleeving, Electrical, Heat Shrinkable, General Specification For (S/S By Sae-Ams-Dtl-23053)
This specification establishes the requirements for various types and colors of electrical insulating sleeving that will shrink to a predetermined size upon the application of heat.
MIL-F-1148 - Fibre, Vulcanized, Electrical And Mechanical Grades See Astm-D710
MIL-F-47095 - Foam, Polyurethane, For Imbedding Electronic Components And Boards
MIL-I-003190/1 - Insulation Sleeving, Electrical, Flexible, Coated Class 130, Type A, Category A
MIL-I-003190/4 - Insulation Sleeving, Electrical, Flexible, Coated Class 155, Type A, Category C
MIL-I-10 - Insulating Compound, Electrical, Ceramic, Class L
This specification covers class L, low dielectric constant (18 or under), ceramic, electrical, insulating compounds, for use in electronic, communications, and allied electrical equipments and the grading thereof.
MIL-I-13548 - Insulation Sleeving, Electrical (Cable Splicing) Ft-96, Ft-97, Ft-98, And Ft-472
This specification covers four types of impregnated, punched, cotton sleeves designated as types FT-96, FT-97, FT-98, and FT-472.
MIL-I-14169 - Insulating Compound, Electrical (Potting) (Use Mil-I-16923 And Mil-M-24041)
MIL-I-15126 - Insulation Tape, Electrical, Pressure Sensitive Adhesive And Pressure Sensitive Thermosetting Adhesive (S/S By A-A-59770)
This specification covers requirements for pressure-sensitive adhesive and pressure sensitive thermosetting adhesive electrical insulation tapes intended for use in construction and repair of electrical and electronic equipment.
MIL-I-15265 - Insulation, Electrical, Plastic (Submarine Bus Bar Covering)
This specification covers plastic, electrical insulating materials used primarily for covering submarine bus bars and battery intercell connections. Other applications may be considered where a tough plastic covering is needed over metal surfaces.
MIL-I-16923 - Insulating Compound, Electrical, Embedding, Epoxy (S/S By A-A-59877)
This specification covers the requirements for a self-supporting epoxy compound for the molding, encapsulating and potting of military electrical equipment.
MIL-I-17205 - Insulation Cloth And Tape, Electrical, Glass Fiber, Varnished (See Notice 1 For Replacement Information)
This specification covers varnished glass fiber cloth and tape for electrical insulation.
MIL-I-17384 - Insulating Compound, Electrical, Quick-Drying
MIL-I-17918 - Insulator, Strain, Rigging
MIL-I-18057 - Insulation Sleeving, Electrical, Flexible, Glass Fiber, Silicone Rubber Treated (S/S By Mil-I-3190 And Mil-I-3190/6)
MIL-I-18622 - Insulation Tape, Electrical, Pressure Sensitive Adhesive, Silicone Rubber Treated Glass, Electrical Cable Splicing, Naval Shipboard (Use Mil-I-22444)
MIL-I-18746 - Insulation Tape, Nonadhering, Glass Fabric, Polytetrafluoroethylene Coated (S/S By A-A-59300)
This specification covers one type of polytetrafluoroethylene-coated glass fabric tape for electrical insulation at temperatures up to 260 degrees centigrade (500 degrees Fahrenheit). Tape procured to this specification does not contain adhesive backing.
MIL-I-19166 - Insulation Tape, Electrical, High-Temperature, Glass Fiber, Pressure-Sensitive
This specification covers glass fiber, silicone adhesive, pressure-sensitive tape for construction and repair of electrical equipment operating at high temperatures.
MIL-I-19254 - Insulation Blankets, Electrical, 20,000 Volts Rating, With Eyelets (S/S By Astm--D1048)
MIL-I-19526 - Insulation Sheets, Electrical, Pasted Mica, Silicone Bonded (Use Hh-I-538)
MIL-I-19632 - Insulation, Electrical, Dielectric Barrier, Laminated, Plastic Film And Rag Paper(No S/S Document)
This specification covers insulation used primarily as dielectric barriers in class A electrical machinery.
MIL-I-19917 - Insulation Sheet, Electrical, Mica Paper, Silicone Bonded (S/S By Nema-Fi1)
MIL-I-21070 - Insulation Sheet And Tape, Electrical, Reinforced Mica Paper (S/S By Ansi/Nema Fi1)
This specification covers flexible reinforced mica paper electrical insulation used in the coils and slots of electrical machinery.
MIL-I-21142 - Insulator, Strain, Electric (Use Mil-C-16536 And Mil-I-790)
MIL-I-21557 - Insulation Sleeving, Electrical, Flexible, Glass Fiber, Vinyl Treated (S/S By Mil-I-003190 Now Mil-I-3190)
MIL-I-22076 - Insulation Tubing, Electrical Nonrigid, Vinyl, Very Low Temperature Grade
This specification covers a very low temperature grade of nonrigid tubing of polyvinyl chloride or polyvinyl chloride-acetate for use as electrical insulation.
MIL-I-22129 - Insulation Tubing, Electrical, Polytetrafluoroethylene Resin, Nonrigid
This specification covers nonrigid polytetrafluoroethylene resin tubing for electrical insulating purposes.
MIL-I-22266 - Insulating Compound, Electrical (For Field Splicing Applications) (S/S By A-A-59296)
This specification covers two component, room-temperature curing, insulating compounds for field-splicing applications.
MIL-I-22444 - Insulation Tape, Electrical, Self Bonding, Silicone Rubber Treated Bias Weave Or Sinusoidal Weave Glass, Cable Splicing, Naval Shipboard
This specification covers silicone rubber treated bias weave or sinusoidal weave glass, self-bonding electrical insulation tape intended for splicing power and control cables in shipboard electrical installations.
MIL-I-22834 - Insulation, Electrical, Dielectric Barrier, Laminated, Plastic Film And Synthetic Fiber Mat
MIL-I-23053/2 - Insulation Sleeving, Electrical, Heat Shrinkable, Polyvinyl Chloride, Flexible, Crosslinked And Non-Crosslinked (S/S By Sae-Ams-I-23053/2)
MIL-I-23053/3 - Insulation Sleeving, Electrical, Heat Shrinkable, Polyvinyl Chloride, Semi Rigid, Crosslinked And Non-Crosslinked (S/S By Sae-Ams-I-23053/3)
MIL-I-23053/9 - Insulation, Sleeving, Electrical, Heat Shrinkable, Fluorosilicone Rubber, Flexible
MIL-I-23264/10 - Insulators, Feedthru (Style 31)
MIL-I-23264/11 - Insulators, Feedthru (Style 32)
MIL-I-23264/12 - Insulators, Feedthru (Style 33)
MIL-I-23264/13 - Insulators, Feedthru (Style 34)
MIL-I-23264/14 - Insulators, Feedthru (Styles 35 And 36)
MIL-I-23264/15 - Insulators, Feedthru (Style 37)
MIL-I-23264/16 - Insulators, Bushing (Styles 40, 41, And 42)
MIL-I-23264/17 - Insulators, Bushing (Style 43)
MIL-I-23264/18 - Insulators, Bowl (Styles 55, 56, And 57)
MIL-I-23264/19 - Insulators, Bowl (Style 58)
MIL-I-23264/1 - Insulators, Standoff (Styles 01, 02, 03, 04, And 06)
MIL-I-23264/20 - Insulators, Strain (Styles 64, 65, 66, And 67)
MIL-I-23264/21 - Insulators, Strain (Styles 68, 69, 70, And 71)
MIL-I-23264/22 - Insulators, Strain (Styles 60, 61, 73, 74, And 75)
MIL-I-23264/23 - Insulators, Spreader (Style 76)
MIL-I-23264/24 - Insulator, Pin, Style 82
MIL-I-23264/25 - Insulators, Pin (Style 81)
MIL-I-23264/2 - Insulators, Standoff (Styles 10, 11, 12, 13, And 14)
MIL-I-23264/3 - Insulators, Standoff (Style 19 And 20)
MIL-I-23264/4 - Insulators, Standoff (Style 21)
MIL-I-23264/5 - Insulators, Standoff (Style 26)
MIL-I-23264/6 - Insulators, Standoff (Style 27)
MIL-I-23264/7 - Insulators, Standoff (Style 28)
MIL-I-23264/8 - Insulators, Standoff (Style 29)
MIL-I-23264/9 - Insulators, Feedthru (Style 30)
MIL-I-23264 - Insulators, Ceramic, Electrical And Electronic, General Specification For
This specification covers the general requirements for electrical and electronic ceramic insulators fabricated from materials conforming to MIL-I-10.
MIL-I-23578 - Insulation Hose, Electrical And Insulation Hoods Insulator (S/S By Astm-D1049 And Astm-D1050)
MIL-I-23594 - Insulation Tape, Electrical, High Temperature, High Temperature, Polytetrafluoroethylene, Pressure-Sensitive (S/S By A-A-59474)
This specification covers the requirements for polytetrafluoroethylene, high temperature insulating, pressure-sensitive adhesive, electrical tapes.
MIL-I-23972 - Insulator Assemblies, Rack, Secondary (S/S By Ansi-C135.7)
This specification covers electrical insulator assemblies consisting of four porcelain spool insulators, mounted on steel rack-back, for supporting secondary and service wiring, rated up to 600 volts potential, on poles and building structures.
MIL-I-24092 - Insulating Varnishes And Solventless Resins For Application By The Dip Process
This specification covers clear solvent type varnishes and clear solventless resin systems used to insulate and bond electrical coils and windings.
MIL-I-24178 - Insulation Tape, Electrical, Semi-Cured Thermosetting Resin Treated Glass, Armature Banding, Naval Shipboard
This specification covers semi-cured thermosetting resin treated, unidirectional glass electrical insulating tape intended for handing armatures of rotating electrical machines for shipboard use.
MIL-I-24204 - Insulation, Electrical, High Temperature, Bonded, Synthetic Fiber Paper (S/S By Nema-Fi3)
This specification covers flexible electrical insulation used in the coils and slots of electrical machinery at temperatures up to 220 deg. C.
MIL-I-24330 - Insulation Sheet, Electrical, Ligno-Cellulosic, High Density, Hardboard
This specification covers fiberistic, ligno-cellulosic high density, laminated sheet materials.
MIL-I-24391 - Insulation Tape, Electrical, Plastic, Pressure-Sensitive
This specification covers one type of plastic, electric, pressure-sensitive, self-extinguishing insulating tape for use at ambient temperatures of not less than minus 12 degrees Celsius (deg. C) nor more than 65 deg. C.
MIL-I-24683 - Insulation Electrical, High Temperature Inorganic Paper
This specification covers a series of flexible electrical insulations for use in applications for electrical machinery at temperature up to 200 degrees Celsius ( Deg. C).
MIL-I-24718 - Insulating Resins, Solventless, Vacuum-Pressure-Impregnating; General Specification For
This specification covers solventless insulating resins of various compositions and classes for treating and impregnating electrical equipment by the vacuum-pressure-impregnation (VPI) process.
MIL-I-24718/1 - Insulating Resins, Solventless, Vacuum-Pressure-Impregnating Epoxy-Lewis Acid, Slightly Thixotropic
MIL-I-24718/2 - Insulating Resins, Solventless, Vacuum-Pressure-Impregnating Replenishment Resin, Epoxy-Lewis Acid, Slightly Thixotropic
MIL-I-24718/3 - Insulating Resins, Solventless, Vacuum-Pressure-Impregnating Polyester Diallyl Phthalate, Slightly Thixotropic
MIL-I-24718/4 - Insulating Resins, Solventless, Vacuum-Pressure-Impregnating Replenishment Resin, Polyester Diallyl Phthalate, Slightly Thixopropic
MIL-I-24768 - Insulation, Plastics, Laminated, Thermosetting; General Specification For
This specification covers thermosetting plastic laminated insulation materials for mechanical and electrical military applications.
MIL-I-24768/1 - Insulation, Plastic, Laminated, Thermosetting, Glass-Cloth, Melamine-Resin (Gme)
MIL-I-24768/10 - Insulation, Plastic, Laminated, Thermosetting, Paper-Base, Phenolic-Resin (Pbe)
MIL-I-24768/11 - Insulation, Plastic, Laminated, Thermosetting, Paper-Base, Phenolic-Resin (Pbg)
MIL-I-24768/12 - Insulation, Plastic, Laminated, Thermosetting, Paper-Base, Phenolic-Resin (Pbm)
MIL-I-24768/13 - Insulation, Plastic, Laminated, Thermosetting, Cotton-Fabric-Base, Phenolic-Resin (Fbe)
MIL-I-24768/14 - Insulation, Plastic, Laminated, Thermosetting, Cotton-Fabric-Base, Phenolic-Resin (Fbg)
MIL-I-24768/15 - Insulation, Plastic, Laminated, Thermosetting, Cotton-Fabric-Base, Phenolic-Resin (Fbi)
MIL-I-24768/16 - Insulation, Plastic, Laminated, Thermosetting, Cotton-Fabric-Base, Phenolic-Resin (Fbm)
MIL-I-24768/17 - Insulation, Plastic, Laminated, Thermosetting, Glass-Cloth, Silicone-Resin (Gsg)
MIL-I-24768/18 - Insulation, Plastic, Laminated, Thermosetting, Glass-Cloth, Phenolic-Resin (Gpg)
MIL-I-24768/19 - Insulation, Plastic, Laminated, Thermosetting, Paper-Base, Phenolic-Resin (Pbm-P)
MIL-I-24768/2 - Insulation, Plastic, Laminated, Thermosetting, Glass-Cloth, Epoxy-Resin (Gee)
MIL-I-24768/20 - Insulation, Plastic, Laminated, Thermosetting, Paper-Base, Phenolic-Resin (Pbm-Pc)
MIL-I-24768/21 - Insulation, Plastic, Laminated, Thermosetting, Paper-Base, Phenolic-Resin (Pbg-P)
MIL-I-24768/22 - Insulation, Plastic, Laminated, Thermosetting, Paper-Base, Phenolic-Resin (Pbg-P)
MIL-I-24768/23 - Insulation, Plastic, Laminated, Thermosetting, Paper-Base, Phenolic-Resin (Pbe-Pc)
MIL-I-24768/24 - Insulation, Plastic, Laminated, Thermosetting, Paper-Base, Phenolic-Resin (Pbm-Pf)
MIL-I-24768/25 - Insulation, Plastic, Laminated, Thermosetting, Paper-Base, Phenolic-Resin (Pbe-Pcf)
MIL-I-24768/26 - Insulation, Plastic, Laminated, Thermosetting, Paper-Base, Epoxy-Resin (Pee)
MIL-I-24768/27 - Insulation, Plastic, Laminated, Thermosetting, Glass-Cloth, Epoxy-Resin (Gee-F)
MIL-I-24768/28 - Insulation, Plastic, Laminated, Thermosetting, Glass-Cloth, Epoxy-Resin (Geb-F)
MIL-I-24768/29 - Insulation, Plastic, Laminated, Thermosetting, Continuous Filament, Glass-Cloth, Epoxy-Resin (Cem-1)
MIL-I-24768/3 - Insulation, Plastic, Laminaterd, Thermosertting, Glass-Cloth, Epoxy-Resin(Geb)
MIL-I-24768/30 - Insulation, Plastic, Laminated, Thermosetting, Continuous Filament, Glass-Cloth, Epoxy-Resin (Cem-3)
MIL-I-24768/31 - Insulation, Plastic, Laminated, Thermosetting, Glass-Mat, Polyester-Resin (Gpo N-1P)
MIL-I-24768/32 - Insulation, Plastic, Laminated, Thermosetting, Glass-Mat, Polyester-Resin (Gpo N-2P)
MIL-I-24768/33 - Insulation, Plastic, Laminated, Thermosetting, Glass-Mat, Polyester-Resin (Gpo N-3P)
MIL-I-24768/4 - Insulation, Plastic, Laminated, Thermosetting, Glass-Mat, Polyester-Resin (Gpo N-1)
MIL-I-24768/5 - Insulation, Plastic, Laminated, Thermosetting, Glass-Mat, Polyester-Resin (Gpo N-2)
MIL-I-24768/6 - Insulation, Plastic, Laminated, Thermosetting, Glass-Mat, Polyester-Resin (Gpo N-3)
MIL-I-24768/7 - Insulation, Plastic, Laminated, Thermosetting, Glass-Cloth, Polytetrafluoroethylene-Resin (Gte)
MIL-I-24768/8 - Insulation, Plastic, Laminated, Thermosetting, Glass-Cloth, Melamine-Resin (Gmg)
MIL-I-24768/9 - Insulation, Plastic, Laminated, Thermosetting, Nylon-Fabric-Base, Phenolic-Resin (Npg)
MIL-I-2707 - Insulating Varnish, Electrical, Impregnating, High Temperature (S/S By Mil-I-24092)
MIL-I-3042 - Insulation, Electrical, Cotton-Fiber, Untreated (S/S By Mil-I-3190)
MIL-I-3053 - Insulation, Electrical, Asbestos Fiber, Treated And Untreated
MIL-I-3064 - Insulation, Electrical, Plastic-Sealer
This specification covers the electrical and physical requirements of the plastic-sealer compound used for sealing electrical cable penetrations, end sealing cables, and fire stop applications requiring good electrical insulation and heat resistant properties.
MIL-I-3158 - Insulation Tape, Electrical Glass-Fiber (Resin-Filled): And Cord, Fibrous-Glass
This specification covers resin treated glass-fiber electrical insulation for use in the insulation of electric cables.
MIL-I-3190/2 - Insulating Sleeving, Electrical, Flexible, Coated, Class 130, Type B, Category B
MIL-I-3190/3 - Insulation Sleeving, Electrical, Flexible, Coated 155, Type A, Category A
MIL-I-3190/5 - Insulation Sleeving, Electrical, Flexible, Coated, Class 200, Type C, Category C
MIL-I-3190/6 - Insulation Sleeving, Electrical, Flexible, Coated, Class 200, Type D, Category C
MIL-I-3190/7 - Insulation Sleeving, Electrical, Flexible, Coated Class 220 Degrees C, Type E, Category C
MIL-I-3190/8 - Insulation Sleeving, Electrical, Flexible, Silicone Coated, Class 220 Deg. C, Type D, Category C
MIL-I-3190/9 - Insulation Sleeving, Electrical, Flexible, Silicone Coated Class 240 Degrees C, Type D, Category C
MIL-I-3190 - Insulation Sleeving, Electrical, Flexible, Coated, General Specification For
This specification covers coated flexible sleeving suitable for use as electrical insulation.
MIL-I-3374 - Insulation Cloth And Tape, Electrical, Varnished Cambric
This specification covers insulation intended for use as cable insulation coil wrappers, and for insulating bus bars, joints and terminals of electric wires and cables winding insulation and other electrical apparatus connections.
MIL-I-3389 - Insulation And Tape, Electrical (Rayon, Untreated)
MIL-I-3393 - Insulation, Cloth And Tape, Electrical (Nylon Fiber, Varnished) (S/S By Mil-I-3374)
MIL-I-3505 - Insulation Sheet And Tape, Electrical, Coil And Slot, High Temperature
This specification covers high temperature mica-glass electrical insulation used in the coils and slots of rotating electrical machinery.
MIL-I-3676 - Insulators, Pin (Lime Glass) (Use Mil-I-23264/24)
MIL-I-3825 - Insulating Tape, Electrical, Self Fusing, For Use In Electronic, Communications, And Allied Equipment (S/S By Astm-D4388)
This specification covers a hand-splicing, self-fusing, electrical insulation tape for use in electronic, communications, and allied equipment. The tape is suitable for use at temperatures from ---55 degrees to +60 degrees C (----67 degrees to 140 degrees F), and when applied, forms a homogeneous insulation. Self-fusion is accomplished without the addition of an adhesive to any surface of the tape. (See 6.1 and 6.1.1)
MIL-I-3930/1 - Insulating And Jacketing Compounds, Electrical (For Cables, Cords, And Wires) Insulating Compound, Type Ip-Medium-Low Temperature, Polyvinylchloride (Pvc) And Polyvinylchloride Acetate (Pvca)
MIL-I-3930/10 - Military Specification Sheet Insulating And Jacketing Compounds, Electrical (For Cables, Cords, And Wires), Insulating Compound, Type Ij-H-Low Temperature, Heat And Weather Resistant, Insulating And Jacketing, Ethylene-Propylene Rubber (Epm) Or Ethylene-Propylene-Diene Rubber (Epdm)
MIL-I-3930/11 - Insulating And Jacketing Compounds, Electrical (For Cables, Cords, And Wires), Insulating Compound, Type Ie-Polyethylene In Accordance With L-P-390, Type Ii, Class L, Grade 3 Or 4, Category 5
MIL-I-3930/12 - Insulating And Jacketing Compounds, Electrical (For Cables, Cords And Wires), Insulating And Jacketing Compound, Type Tpe-S-Low Temperature, Heat And Ozone Resistant, Styrenic Thermoplastic Elastomer
MIL-I-3930/13 - Insulating And Jacketing Compounds, Electrical (For Cables, Cords, And Wires) Insulating And Jacketing Compound, Type Tpe-O-Low Temperature, Weather Resistant, Olefinic Thermoplastic Elastomer
MIL-I-3930/14 - Insulating And Jacketing Compounds, Electrical (For Cables, Cords, And Wires), Jacketing Compound, Type Jp-Medium-Low Temperature, Polyvinylchloride (Pvc) And Polyvinylchloride-Acetate (Pvca)
MIL-I-3930/15 - Insulating And Jacketing Compounds, Electrical (For Cables, Cords, And Wires), Jacketing Compound, Type Js-Medium-Low Temperature Styrene-Butadiene Rubber (Sbr)
MIL-I-3930/16 - Insulating And Jacketing Compounds, Electrical (For Cables, Cords And Wires) Jacketing Compound, Type Js-L-Low Temperature Heat-Resistant, Styrene-Butadiene Rubber (Sbr)
MIL-I-3930/17 - Insulating And Jacketing Compounds, Electrical (For Cables, Cords, And Wires), Jacketing Compound, Type Jr-Low Temperature, Natural Rubber
MIL-I-3930/18 - Insulating And Jacketing Compounds, Electrical (For Cables, Cords, And Wires), Jacketing Compound, Type Jn-Moderate-Low Temperature, Chloroprene Rubber (Cr)
MIL-I-3930/19 - Insulating And Jacketing Compounds, Electrical (For Cables, Cords, And Wires), Jacketing Compound, Type Jn-L-Low Temperature, Chloroprene Rubber (Cr)
MIL-I-3930/2 - Insulating And Jacketing Compounds, Electrical (For Cables, Cords And Wires), Insulating Compound Type Is-Medium-Low Temperature, Styrene-Butadiene Rubber (Sbr)
MIL-I-3930/20 - Insulating And Jacketing Compounds, Electrical (For Cables, Cords, And Wires), Jacketing Compound, Type Jh-Low Temperature, Heat Resistant, Ethylene-Propylene (Epm) Or Ethylene-Propylene-Diene Rubber (Epdm)
MIL-I-3930/21 - Insulating And Jacketing Compounds, Electrical (For Cables, Cords, And Wires), Jacketing Compound, Type Ju-Low Temperature, Heat And Weather Resistant, Polyurethane Thermoplastic Elastomer
MIL-I-3930/22 - Insulating And Jacketing Compounds, Electrical (For Cables, Cords, And Wires), Jacketing Compound, Type Jn-Moderate-Low Temperature, Chlorinated Polyethylene Rubber (Cm)
MIL-I-3930/3 - Insulating And Jacketing Compounds, Electrical (For Cables, Cords And Wires), Insulating Compound, Type Is-L-Low Temperature, Heat Resistant, Styrene Butadiene Rubber (Sbr)
MIL-I-3930/4 - Insulating And Jacketing Compounds, Electrical (For Cables, Cords, And Wires), Insulating Compound, Type Ir-Low Temperature, Natural Rubber
MIL-I-3930/5 - Insulating And Jacketing Compounds, Electrical (For Cables, Cords, And Wires), Insulating Compound, Type Il-Low Temperature, Natural Rubber Deposited From A Rubber Latex Compound
MIL-I-3930/6 - Insulating And Jacketing Compounds, Electrical (For Cables, Cords, And Wires) Insulating Compound, Compound, Type Ij-S-Medium-Low Temperature Insulating And Jacketing, Styrene-Butadiene Rubber (Sbr)
MIL-I-3930/7 - Insulating And Jacketing Compounds, Electrical (For Cables, Cords, And Wires), Insulating Compound, Type Il-H-Low Temperature, Heat Resistant, Natural Rubber Deposited From A Rubber Latex Compound
MIL-I-3930/8 - Insulating And Jacketing Compounds, Electrical (For Cables, Cords, And Wires), Insulating Compound Type Il-Rn-Low Temperature, Layer Of Natural Rubber Latex And A Color-Coded Outer Layer Of Chloroprene Rubber (Cr) Latex Bonded Together
MIL-I-3930/9 - Insulating And Jacketing Compounds, Electrical (For Cables, Cords, And Wires), Insulating Compound, Type Ih-Low Temperature, Heat And Ozone Resistant, Ethylene-Propylene Rubber (Epm) Or Ethylene-Propylene-Diene Rubber (Epdm)
MIL-I-3930 - Insulating And Jacketing Compounds, Electrical (For Cables, Cords, And Wires), General Specification For
This specification covers the general composition and the physical, chemical, and low temperature properties of certain polymeric compounds used in the insulating and jacketing of electrical cables, cords, and wires, as determined on specimens removed therefrom, but does not cover compounds for hookup wires nor items where the wall thickness of the insulation or jacket is less than .006 inch.
MIL-I-46058 - Insulating Compound, Electrical (For Coating Printed Circuit Assemblies)
This specification covers conformal coatings which are suitable for application to printed circuit assemblies by dipping, brushing, spraying, or vacuum deposition.
MIL-I-46838 - Insulating Compound, Electrical, Silicone Rubber, Room Temperature Vulcanizing (S/S By A-A-56023)
This specification covers four types of room temperature vulcanizing, silicone rubber insulation compounds.
MIL-I-46852 - Insulation Tape, Electrical, Self Adhering Unsupported Silicone Rubber (S/S By A-A-59163)
MIL-I-46865 - Insulating Compound, Electrical, Epoxy, Colloidal Silica Filled For Potting And Encapsulation (S/S By A-A-59134)
This specification covers an epoxy resin electrical insulating compound used for potting and encapsulating.
MIL-I-46877 - Insulating Compound Kit, Electrical
This specification covers the requirements for a two part, solvent free, clear, flexible silicone resin system for use in packaging electronic equipment.
MIL-I-46879 - Insulating Compound, Electrical, Epoxy Base Resin
MIL-I-46882 - Insulation Sheet And Strip, Cellular, Elastomeric
MIL-I-47001 - Insulation, Electrical Epoxy Metal Laminate
MIL-I-47048 - Insulation Sleeving, Electrical, Dual Wall Irradiated Polyolefin, Heat Shrinkable For 110 Degrees Celsius (C) Service
MIL-I-47049 - Insulation Tubing, Silicone Rubber, Heat Shrinkable
MIL-I-47096 - Insulating Material, Silicone Rubber, Two Component, Room Temperature Curing
MIL-I-47098 - Insulating Sleeving, Electrical, Heat Shrinkable, Irradiated Polyolefin (S/S By Mil-I-23053 Now Mil-Dtl-23053)
MIL-I-47100 - Insulation Sleeving, Flexible, Braided, 200 Degrees Celsius (High Temperature Polyamide)
This specification covers a high temperature polyamide (nylon) braided flexible sleeving.
MIL-I-47101 - Insulation, Heat Shrinkable, Molded Parts
MIL-I-47151 - Insulating Compound, Electrical Embedding
MIL-I-47152 - Insulation, Electrical, Paper, Creped)
MIL-I-47199 - Insulating Compound, Electrical, Low Viscosity, Silicone Rubber
This specification covers the requirements for a two component, room temperature curing, low viscosity, white, silicone rubber insulating compound.
MIL-I-47203 - Insulation Sleeving, Electrical, Braided (S/S By Mil-S-47053)
This specification covers the requirements for a braided nylon electrical insulation material.
MIL-I-47293 - Insulation Compound, Polysulfide Polymer
MIL-I-49456 - Insulation Sheet, Electrical, Silicone Rubber Thermally Conductive, Fiberglass Reinforced
MIL-I-49466 - Insulator; Disks, Plates, And Washers General Specification For
This specification covers the general requirements for insulator; disks, plates, and washers used in conjunction with small electrical and electronic devices.
MIL-I-49466/1 - Insulator; Disks, Plates, And Washers Polyimide .002 Or .005 Inch Thick
MIL-I-49466/2 - Insulator; Disks, Plates, And Washers Silicon Rubber, Fiberglass Reinforced .010 And .015 Inch Thick
MIL-I-49466/3 - Insulator; Disks, Plates, And Washers Insulators For Mounting
MIL-I-545 - Insulation Sheet, Electrical, Paper, Pressboard
This specification covers the requirements for paper, pressboard, electrical insulation sheet. The insulation is class 0 insulation with a continuous-operating-temperature limit of 90 degrees C, in accordance with Institute of Electrical and Electronics Engineers (IEEE), electrical-insulation temperature standards (see 6.1). For purposes of this specification, the term "insulation" is used herein when referring to the paper, pressboard, electrical insulation sheet.
MIL-I-631 - Insulation, Electrical, Synthetic - Resin Composition, Nonrigid
This specification covers only the basic characteristics required by the synthetic insulating material, as such, and the methods suited to their satisfactory determination.
MIL-I-695 - Insulation, Electrical, Paper (Slot Cell)
This specification covers insulation used primarily in the coils and slots of electrical machinery.
MIL-I-787 - Insulator, Standoff, Porcelain, With Galvanized Wood Screw
MIL-I-789 - Insulator, Cleat, Porcelain, Glazed Or Unglazed 2-Wire
MIL-I-790 - Insulator, Electric, Porcelain (Use Hh-I-435)
MIL-I-81550 - Insulating Compound, Electrical, Embedding, Reversion Resistant Silicone (S/S By Sae-As81550)
This specification covers the requirements for two types of a two-part, transparent, reversion resistant flexible insulating compound, to provide resilient, environmental, and electrical insulation of components in systems in temperature range -65 degrees to +200 degrees C (-85 degrees to +392 degrees F).
MIL-I-81765/1 - Insulating Component, Molded, Electrical, Heat Shrinkable Polyolefin, Crosslinked, Semi-Rigid And Flexible (S/S By Sae-As81765/1)
MIL-I-81765/2 - Insulating Components, Molded, Electrical, Heat Shrinkable Polychloroprene, Flexible, Crosslinked (S/S By Sae-As81765/2)
MIL-I-81765/3 - Insulating Components, Molded, Electrical, Heat Shrinkable Silicone Rubber, Flexible, Crosslinked (S/S By Sae-As81765/3)
MIL-I-81765/4 - Insulating Component, Molded, Electrical, Heat Shrinkable Fluoroelastomer, Flexible, Crossliked (S/S By Sae-As81765/4)
MIL-I-81765/5 - Insulating Components, Molded, Electrical, Heat Shrinkable Butyl Rubber, Flexible, Crosslinked
MIL-I-81765/6 - Insulation Components, Molded, Electrical, Heat Shrinkable Fluoropolymer, Semi-Rigid, Crosslinked (S/S By Sae-As81765/6)
MIL-I-81765/7 - Insulating Components, Molded, Electrical, Heat Shrinkable Fluoropolymer Composite, Semi-Rigid, Crosslinked (S/S By Sae-As81765/7)
MIL-I-81765 - Insulating Components, Molded, Electrical, Heat Shrinkable, General Specification For (S/S By Sae-As81765)
This specification covers requirements for material used in electrical insulating heat shrinkable components. The continuous operating temperature of these materials shall range from -75 degrees C to +200 degrees C (-103 degrees F to +392 degrees F) (See 6.1).
MIL-I-85080 - Insulation Sleeving, Electrical, Shrinkable Without Heat, General Specification For (S/S By Sae-As85080)
This specification establishes requirements for chemically expanded, flexible, electrical insulating sleeving that shrinks to a predetermined size upon solvent evaporation.
MIL-I-85080/1 - Insulation Sleeving, Electrical, Shrinkable Without Heat, Polyvinyl Chloride, Flexible Non-Crosslinked (S/S By Sae-As85080/1)
MIL-I-85080/2 - Insulation Sleeving, Electrical, Nonheat Shrink, Silicone Rubber, Flexible (S/S By Sae-As85080/2)
MIL-I-85080/3 - Insulation Sleeving, Electrical, Shrinkable Without Heat, Polyurethane Flexible (S/S By Sae-As85080/3)
MIL-I-85080-4 - Insulation Sleeving, Electrical, Shrinkable Without Heat, Chlorosulfonatd Polyethylene Flexible (S/S By Sae-As85080/4)
MIL-I-85080/5 - Insulation Sleeving, Electrical, Shrinkable Without Heat, Polychloroprene (S/S By Sae-As85080/5)
MIL-M-24519 - Molding Plastics, Electrical, Thermoplastic
This specification covers the basic properties of thermoplastic molding compounds used to mold electric and electronic component parts.
MIL-P-15037 - Plastic Sheet, Laminated, Thermosetting, Glass-Cloth, Melamine-Resin (S/S By Mil-I-24768/1)
This specification covers type GME glass cloth, melamine resin plastic thermosetting sheet materials.
MIL-P-15047 - Plastic Sheets, Laminated Thermosetting, Nylon Fabric Base, Phenolic-Resin (S/S By Mil-I-24768/9)
This specification covers type NPG plastic laminated thermosetting sheet material intended primarily for electrical insulating purposes.
MIL-P-47005 - Paste, Color Concentrate, Epoxy Resin Base
MIL-P-47099 - Polyurethane Foam, Polyether Type, Rigid, For Packaging And Encapsulation Of Electrical Components
This specification covers the requirements and tests for three types of two-component polyether type polyurethane foam,rigid, for packaging and encapsulation of electronic components.
MIL-P-47104 - Potting Compound, Epoxy Resin, Thermosetting
MIL-P-47201 - Polyurethane, Rapid Demold Cable Elastomer (S/S By Mil-P-47298)
MIL-P-47202 - Paper, Tissue, Insulating, Electrical
MIL-P-47271 - Paper, Insulating, Electrical
MIL-P-997 - Plastic Material, Laminated, Thermosetting, Electrical Insulation: Sheets, Glass Cloth, Silicone Resin (S/S By Mil-I-24768/17)
This specification covers type GSG, class 180 plastic insulating material having fire and electrical arc resistance, heat resistance, and very good electrical insulation resistance and dielectric loss characterics.
MIL-PRF-17695 - Insulation Tape, Electrical, Filler Type, Flameproof, Synthetic
This specification covers the requirements for a filter type insulation materal in tape form intended for use as a filter, material for splicing power and control cables as shown in section 4 of 9000-S6202-73960.
MIL-PRF-46846 - Rubber, Synthetic, Heat - Shrinkable
This specification covers the type and class requirements for extruded tubing, molded parts, and extruded shapes that are flexible, electrical insulating and whose dimensions will reduce to a predetermined size upon the application of heat.
MIL-R-47004 - Resin, Epoxy Base, Thixotropic
This specification covers the requirements for a thixotropic epoxy base resin.
MIL-S-47053 - Sleeving, Textile, Braided, Polyamide (S/S By A-A-59301)
This specification covers one type of tubular braided, black polyamide sleeving. The sleeving is suitable for use within a temperature range of minus 55 degrees Celsius (C) to 105 degrees C.
MIL-S-85848 - Sleeving, For Identification Marking, Heat Shrinkable, General Specification For (S/S By Sae-As85848)
This specification establishes the requirements for various types of identification sleeving that will shrink to a predetermined size upon the application of heat after it has been marked., Continuous operating temperature ratings range from -55 degrees to 175 degrees C (-67 degrees to 347 degrees F). (See 6.1).
MIL-S-85848/1 - Sleeving, For Identification Marking, Heat Shrinkable, Polyoefin, Flexible (S/S By Sae-As85848/1)
MIL-S-85848/2 - Sleeving, For Identification Marking, Heat Shrinkable, Polyvinylidene Fluoride, Flexible (S/S By Sae-As85848/2)
MIL-T-13020 - Tape, Rubber Unvulcanized, Splicing And Molding (Tapes Tl-317/U And Tl-318/U)
MIL-T-19292 - Tape, Glass Fiber, Asphalt And Oil Impregnated
MIL-T-22260 - Tape, Insulating, Electrical, Pressure Sensitive, Etched Polytetrafluorethylene (S/S By Mil-T-23594)
MIL-T-22742 - Tape, Insulating, Tetrafluoroethylene Resin (Teflon), Pressure-Sensitive Adhesive (S/S By Mil-T-23594)
MIL-T-22755 - Tape, Repair; Magnetic Minesweeping Cable Sheath
This specification covers repair tape for the insulation of splices and for making watertight repairs on magnetic minesweeping cable sheaths.
MIL-T-47050 - Tubing, Electrical Insulation, Heat Shrinkable, Polyvinylidene Fludride
MIL-T-47051 - Tubing, Heat Shrinkable
This specification covers the requirements for heat-shrinkable tubing intended for use in rocket motor igniters.
MIL-T-47052 - Tape, Epoxy-Glass Cloth, Thermosetting, Pressure Sensitive Adhesive
This specification covers one type of epoxy-glass cloth, thermosetting, pressure sensitive adhesive tape.
MIL-T-47103 - Tape, Filament Reinforced, Non-Woven, Polyester
MIL-T-638 - Tape, Insulating (Electrical) Linen-Finish, Plain (Use Ddd-T-86)
MIL-V-1137 - Varnish, Electrical-Insulating (For Electro-Motive Equipment) (S/S By Mil-I-24092)
MIL-V-47006 - Varnish, Insulating, Electrical, Unmodified Epoxy Base
MIL-W-52815 - Washer: Insulating, For Split-Knob Type Electrical Insulator
MS16229 - Insulator, Selected Standards (Use Mil-I-23264)
MS16679 - ( Images) Insulator, Bushing: Spark Plug Cable Terminal (Other Than Aircraft)
MS16680 - ( Images) Insulator, Bushing: Spark Plug Cable Elbow (Other Than Aircraft)
MS25227 - Strip, Mounting Nut Insulating (Use Ms3373)
MS3109 - ( Images) Boots, Heat-Shrinkable, Strain-Relief, Right Angle (S/S By Sae-As31091)
MS3117 - ( Images) Boots, Heat-Shrinkable, Strain-Relief, Right Angle (S/S By Sae-As31171)
MS3373 - ( Images) Strip, Mounting, Nut Insulating, For Ms 27212 Terminal Board (S/S By Sae-As33731)
MS35511 - Compound, Insulating, Ignition
MS35631 - Varnish, Insulating
MS35632 - Varnish, Moisture And Fungus Resistant
MS75076 - ( Images) Insulator, Strain, With Clevis
MS75077 - ( Images) Insulator, Strain, With Clevis
MS91083 - Insulator, Pin (Lime Glass), Style Dp (Use Mil-I-23264/24)
MS91084 - Insulator, Pin (Lime Glass), Style Exchange (Use Mil-I-23264/24)
MS91085 - Insulator, Pin (Lime Glass, Style Tw )Use Mil-I-23264/24A
QPL-10-112 - Insulating Compound, Electrical, Ceramic, Class L, General Specification For
QPL-1137-12 - Varnish, Electrical-Insulating (For Electro-Motive Equipment) (Use Mil-I-24092
QPL-15037-70 - Plastic Sheet, Laminated, Thermosetting, Glass-Cloth, Melamine-Resin
QPL-15265-16 - Insulation, Electrical, Plastic (Submarine Bus Bar Covering) (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)
QPL-16923-58 - Insulating Compound, Electrical, Embedding, Epoxy
QPL-19166-30 - Insulation Tape, Electrical, High-Temperature, Glass Fiber, Pressure-Sensitive (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)
QPL-19526-3 - Insulation Sheets, Electrical, Pasted Mica Silicone Bonded (Use Hh-I-538)
QPL-19917-4 - Insulation Sheet, Electrical, Mica Paper, Silicone Bonded
QPL-21557-16 - Insulation Sleeving, Electrical, Flexible, Glass Fiber, Vinyl Treated
QPL-22076-25 - Insulation Tubing, Electrical, Nonrigid, Vinyl, Very Low Temperature Grade
QPL-22755-1 - Tape, Repair, Magnetic Minesweeping Cable Sheath
QPL-23403-1 - Compound, Soft Film, Corrosion-Preventive, Non-Staining
QPL-23594-7 - Tape, Pressure Sensitive Adhesive, Electrical, High Temperature Insulation, Polytetrafluoroethylene
QPL-24092-39 - Insulating Varnishes And Solventless Resins For Application By The Dip Process (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)
QPL-24204-11 - Insulation, Electrical, High Temperature, Bonded, Synthetic Fiber Paper
QPL-24391-19 - Insulation Tape, Electrical, Plastic, Pressure-Sensitive (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)
QPL-24519-31 - Molding Plastics, Electrical, Thermoplastic (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)
QPL-2707-10 - Insulating Varnish, Electrical, Impregnating, High Temperature (Use Mil-I-24092)
QPL-2759 - Dead Reckoning Tracer (Drt) (Naval Shipboard)
QPL-3064-24 - Insulation, Electrical, Plastic-Sealer (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)
QPL-3190-28 - Insulation Sleeving, Electrical, Flexible, Coated, General Specification For (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)
QPL-3825-4 - Insulation Tape, Electrical (Polyethylene&Base, Self&Fusing, For Use In Electronic, Communications, And Allied Equipment)
QPL-46058-87 - Insulating Compound, Electrical (For Coating Printed Circuit Assemblies)(Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)
QPL-631-73 - Insulation, Electrical, Synthetic-Resin Composition, Nonrigid (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)
QPL-7444-17 - Insulation Sleeving, Electrical, Flexible
QPL-7768-6 - Light, Bracket, Work Table
QPL-7798-25 - Insulation Tape, Electrical, Pressure-Sensitive Adhesive, Plastic
QPL-81550-4 - Insulating Compound, Electrical, Embedding, Reversion Resistant Silicone
QPL-997-76 - Plastic Material, Laminated, Thermosetting Electrical Insulation: Sheets, Glass Cloth, Silicone Resin
QPL-HH-I-595-8 - Insulation Tape, Electrical, Pressure Sensitive Adhesive, Plastic, For Low Temperature Application
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business