INCH-POUND
MIL-DTL-23053/11C
17 June 1996
SUPERSEDING
MIL-I-23053/11B
01 May 1986
DETAIL SPECIFICATION SHEET
INSULATION SLEEVING, ELECTRICAL, HEAT SHRINKABLE,
FLUORINATED ETHYLENE PROPYLENE, NON-CROSSLINKED
This specification is approved for use by all
Department and Agencies of the Department of Defense.
The requirements for acquiring the sleeving described herein shall consist
of this specification sheet and the issue of the following specification
listed in that issue of the Department of Defense Index of Specifications
and Standards (DODISS) specified in the solicitation: MIL-DTL-23053.
REQUIREMENTS:
PolYmer type:
The base polymer used in formulating this sleeving shall be
fluorinated ethylene propylene.
Continuous operating temperature range:
-67°C (-88°F) to +200°C (+392°F).
Color: The sleeving shall be furnished in clear (water white to transparent
blue), the as manufactured color.
Class: The sleeving shall be furnished in the following classes, as specified
(see 6.2a):
Class 1 - Normal shrink ratio, Heavy Wall
Class 2 - High shrink ratio, Medium Wall
Longitudinal change:
± 15 percent
Military part number: The Military part number shall consist of this
specification sheet and dash numbers as follows:
AMSC N/A
FSC 5970
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
1 of 5
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business