INCH-POUND
MIL-DTL-23053/15B
17 June 1996
SUPERSEDING
MIL-I-23053/15A
01 May 1986
DETAIL SPECIFICATION SHEET
INSULATION SLEEVING, ELECTRICAL, HEAT SHRINKABLE
POLYOLEFIN, HEAVY-WALL, COATED, FLEXIBLE, OUTER WALL CROSSLINKED
This specification is approved for use by all
Departments and Agencies of the Department of Defense.
The requirements for acquiring the sleeving described herein shall consist
of this specification sheet and the issue of the following specification
listed in that issue of the Department of Defense Index of Specifications
and Standards (DODISS) specified in the solicitation: MIL-DTL-23053.
REQUIREMENTS:
Polymer type:
The base polymer used in formulating the outer wall of this
sleeving shall be a polyolefin.
Continuous operating temperature range:
-55°C (-67°F) to +11O°C (+230°F).
Color: The heat shrinkable sleeving shall be furnished in colors that conform
to the requirements of Class II of MIL-STD-104. Black shall be the standard
acquisition color.
Longitudinal change:
+1 -10 percent
Classes: The sleeving shall be furnished in the following classes, as
specified:
Class 1 - Heavy Wall
Class 2 - Medium Wall
Coatings: The inner wall of the sleeving shall be coated with an adhesive or
sealant type material which shall effectively seal the enclosed area against
moisture.
Adhesive:
Adhesive is for pressure retention and load bearing applications.
Sealant:
Sealant is for water hold out applications.
FSC 5970
AMSC N/A
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
1 of 5
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business