INCH-POUND
MIL-DTL-23053/4D
17 June 1996
SUPERSEDING
MIL-I-23053/4C
01 May 1986
DETAIL SPECIFICATION SHEET
INSULATION SLEEVING, ELECTRICAL, HEAT SHRINKABLE,
POLYOLEFIN, DUAL-WALL, OUTER WALL CROSSLINKED
This specification is approved for use by all
Departments and Agencies of the Department of Defense.
The requirements for acquiring the sleeving described herein shall consist
of this specification sheet and the issue of the following specification
listed in that issue of the Department of Defense Index of Specifications
and standards (DODISS) specified in the solicitation: MIL-DTL-23053
REQUIREMENTS:
Polymer type:
The base polymer used in formulating the outer wall of this
sleeving shall be polyolefin.
Continuous operating temperature range:
-55°C (-67°F) to +110°C (+230°F).
Composition: The heat shrinkable sleeving shall consist of a crosslinked outer
wall which shrinks and an inner wall which flows upon the application of heat.
Color: The heat shrinkable sleeving shall be furnished in the color specified
by the acquisition activity (see 6.2b); however, black shall be considered
standard. Colors shall conform to the requirements of Class 1 of MIL-STD-104.
Classification: The heat shrinkable sleeving shall be furnished in the
following classes, as specified (see 6.2a):
Class 1 - Semi-rigid, non-flame retardant
Class 2 - Flexible, flame retardant
Class 3 - Flexible, flame retardant, high expansion
Longitudinal change:
Class 1 - +1, -10 percent
Class 2 - +1, -5 percent
Class 3 - +1, -15 percent
AMSC N/A
FSC 5970
DISTRIBUTION STATEMENT A.
Approved for public release; distribution is unlimited.
1 of 6
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business