17 June 1996
01 May 1986
DETAIL SPECIFICATION SHEET
INSULATION SLEEVING, ELECTRICAL, HEAT SHRINKABLE,
POLYOLEFIN, FLEXIBLE, CROSSLINKED
This specification is approved for use by all
Departments and Agencies of the Department of Defense.
The requirements for acquiring the sleeving described herein shall consist
of this specification sheet and the issue of the following specification
listed in that issue of the Department of Defense Index of Specifications
and Standards (DODISS) specified in the solicitation: MIL-DTL-23053
The base polymer used in formulating this sleeving shall be a
Continuous operating temperature range: Classes 1 and 2: -55°C (-67°F) to +135°C
(+275°F); Class 3: -25°C (-13°F) to +125°C (+257°F).
Classification: The heat shrinkable sleeving shall be furnished in the
following classes, as specified (see 6.2a):
Class 1 - Flame resistant
Class 2 - Flammable (clear only)
Class 3 - Highly flame resistant
Color: Class 2 shall be furnished in clear. Classes 1 and 3 shall be furnished
in colors only. Colors shall conform to the requirements of Class 1
Longitudinal change: Classes 1, 2: ± 5 percent, Class 1 - overexpanded sleeving
+5, -50 percent; Class 3: +1, -10 percent.
Military part number: The Military part number shall consist of the basic
number of this specification sheet and dash numbers as follows:
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
1 of 7
© Copyright 2015 Integrated Publishing, Inc.