MIL-I-85080/4(AS)
TABLE I. Dimensions (inches). 1/
Military part number 2/ |
As supplied I.D. min 3/ |
After unrestricted shrinkage |
|
I.D. max |
Wall thickness 4/ |
||
M85080/4-001-0 |
.170 |
.125 |
.062 |
M85080/4-002-0 |
.252 |
.187 |
.062 |
M85080/4-003-0 |
.338 |
.250 |
.062 |
M85080/4-004-0 |
.506 |
.375 |
.062 |
M85080/4-005-0 |
.672 |
.500 |
.062 |
M85080/4-006-0 |
.843 |
.625 |
.062 |
M85080/4-007-0 |
1.012 |
.750 |
.062 |
M85080/4-008-0 |
1.181 |
.875 |
.062 |
M85080/4-009-0 |
1.350 |
1.000 |
.062 |
M85080/4-010-0 |
1.688 |
1.250 |
.062 |
M85080/4-011-0 |
2.025 |
1.500 |
.062 |
M85080/4-012-0 |
2.363 |
1.750 |
.062 |
M85080/4-013-0 |
2.700 |
2.000 |
.062 |
1/ Diameter limits for object to be enclosed should be in accordance with the recommendations of the manufacturer.
2/ The color code identified is the standard acquisition color.
3/ The inner diameter of the sleeve may be mechanically expanded 2X the recovered inside diameter when in the as-supplied condition. The manufacturer
should be consulted for special applications and recommendations.
4/ Wall shrinkage will be less if shrinkage is restricted.
Unrestricted shrinkage: 4.6.3.13; 23° ± 1°C (73.4° ± 2°F) for 24 hours.
TABLE II. Properties after unrestricted shrinkage.
Property |
Requirement |
Test conditions |
Restricted shrinkage |
No cracks |
4.6.3.2 |
Voltage withstand |
Pass |
4.6.6 |
Dielectric strength, volts per mil min |
500 |
4.6.2; ASTM D 876 |
Volume resistivity, OHM-CM, min |
1011 |
4.6.2; ASTM D 876 |
Water absorption, % max |
1.0 |
4.6.2, ASTM D 570, Par 6.1 |
Fungus resistance |
Non nutrient |
4.6.2; ASTM G 21 |
Low temperature flex |
No cracking |
4.6.6; -35°±2°C (-31° ± 2°F) |
Heat shock |
No cracks, flowing or dripping |
4.6.7; 150°±1°C (302° ± 2°F) |
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business