A-A-56023B
TABLE III. Conditioning requirements and testing conditions.
Conditioning tolerances 1
Conditioning
Testing conditions
procedure
Time
Temp
Temperature
Remarks
and tolerances
-0, +6 min.
E (low temperature)
2.8 °C
24° ±5.6 °C or
Start test immediately
-54° ±2.8 °C
after the cycling has
as indicated
been completed.
-0, +6 min.
E (high temperature)
5.6 °C
24° ±5.6 °C or
Start test immediately
232° ±5.6 °C
after the cycling has
as indicated
been completed.
1
Condition A: As received, no special conditioning. Condition E: Temperature conditioned.
TABLE IV. Test methods.
Requirement
Test method
Viscosity
ASTM D1084, method B
Pot life
MIL-PRF-23586
Hardness
ASTM D2240
Tensile strength
ASTM D412
Tear strength
ASTM D624
Elongation
ASTM D412
Dielectric strength
ASTM D149
Glass transition temperature
IPC-TM-650, method 2.4.24
4. REGULATORY REQUIREMENTS
4.1 Recovered materials. The offeror/contractor is encouraged to use recovered materials to the
maximum extent practicable, in accordance with paragraph 23.403 of the Federal Acquisition
Regulation (FAR).
5. PRODUCT CONFORMANCE PROVISIONS
5.1 Product conformance. The products provided shall meet the salient characteristics of this
CID, conform to the producer's own drawings, specifications, standards, and quality assurance
practices, and be the same product offered for sale in the commercial marketplace. The
government reserves the right to require proof of such conformance.
5.2 Market acceptability. The products offered must have been previously sold either to the
government or on the commercial market.
5.3 Metric products. Products manufactured to metric dimensions will be considered on an
equal basis with those manufactured using inch-pound units, provided they fall within specified
tolerances using conversion tables contained in the latest revision of FED-STD-376, "Preferred
Metric Units for General Use by the Government", and all other requirements of this CID are
met. If a product is manufactured to metric dimensions and those dimensions exceed the
3
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business