A-A-56023B
tolerances specified in the inch-pound units, a request should be made to the contracting officer
to determine if the product is acceptable. The contracting officer has the option of accepting or
rejecting the product.
6. PACKAGING
6.1 Preservation, packing, and marking. Preservation, packing, and marking shall be as
specified in the acquisition order (see 7.4(c)).
7. NOTES
7.1 Part or identification number (PIN). The following PIN procedure is for government
purposes and does not constitute a requirement for the contractor.
AA56023 - X
Type:
1
-
Type I - Viscosity, 200 to 500 poises
2
-
Type II - Viscosity, 200 to 600 poises
3
-
Type III - Viscosity, 300 to 900 poises
4
-
Type IV - Viscosity, 80 to 250 poises
CID number
Example of reference part number: AA56023-1
7.2 Material safety data sheets. Material safety data sheets shall be prepared for the insulating
compounds described herein in accordance with the requirements of FED-STD-313, "Material
Safety Data, Transportation Data and Disposal Data for Hazardous Materials Furnished to
Government Activities". Contracting officers will identify those activities requiring copies of
completed material safety data sheets prepared in accordance with FED-STD-313. The pertinent
Government mailing addresses for submission of data are listed in FED-STD-313.
7.3 Sources of documents.
7.3.1 FAR. The FAR may be obtained from the Superintendent of Documents, P.O. Box
371954, Pittsburgh, PA 15250-7954. Electronic copies may be obtained from
https://www.acquisition.gov/far/.
7.3.2 Federal standards. Copies of federal standards may be obtained from General Services
Administration, Federal Supply Service, Specification Section, 470 East L'Enfant Plaza SW, Suite
8100, Washington, DC 20407. Electronic copies may be obtained from
https://assist.daps.dla.mil/.
7.3.3 Military specifications. Copies of military specifications may be obtained from
Standardization Documents Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA
19111-5094. Electronic copies may be obtained from https://assist.daps.dla.mil/.
4
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business