MIL-DTL-23053/14B
TABLE II.
Physical properties. - Continued
Characteristic
Requirement
Test procedure and
conditions
After unrestricted
shrinkage:
ID, maximum
Table I
4.6.3
Wall thickness
Table I
4.6.3
Tensile strength,
6,500 (44.8)
4.6.13 ASTM D638, 20
psi (MPa), minimum
inches/minute
Ultimate elongation,
4.6.13 ASTM D638, 20
200
percent, minimum
inches/minute
Dielectric breakdown
11,000
4.6.2 ASTM D876
volts, minimum
1015
Volume resistivity,
4.6.2 ASTM D876
Ohm-cm, minimum
Water absorption,
0.1
4.6.2 ASTM D570, 24 hrs.
percent, maximum
at 23°C
Low temperature
No cracking
4.6.7.1 -65° ± 1°C
flexibility
(-85° ± 2°F)
Heat resistance,
properties after:
4.6.9 200° ± 2°C
(392° ± 4°F) for
Tensile strength,
6,000 (41.4)
168 hours
psi (MPa), minimum
Ultimate elongation,
175
percent, minimum
Dielectric breakdown
10,000
volts, minimum
Specific gravity,
1.73
4.6.2 ASTM D792
maximum
Self-extinguishing
4.6.14 Procedure A
Flammability
ASTM D2671
15 seconds and
3 inches
3
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business