MIL-PRF-46846D
Class 2 - Molded parts and extruded shapes, expansion ratio 2 to 4, service
temperature range -75 to 135C.
Type III. Cross-linked, fluoroelastomer, modified polymer of hexafluoropropylene and
vinylidene fluoride dipolymer, molded parts and extended periods of high temperature and
solvent attack.
Class 1 - Tubing, expansion ratio 2, service temperature range -55 to 200C.
Class 2 - Molded parts and extruded shapes, expansion ratio 3.5, service
temperature range of -55 to 200C.
Type IV. Cross-linked, modified, propellant-resistant butyl rubber tubing, molded parts
and extruded shapes, flexible for protection of cable assemblies exposed to hypergolic
fuels.
Class 1 - Tubing, expansion ratio 2, service temperature range of -55 to 125C.
Class 2 - Molded parts and extruded shapes, expansion ratio 2.5, service
temperature range of -55 to 125C.
Type V. Deleted (see 6.4.2).
Type VI. Cross-linked, modified, flame-resistant ethylene-propylene rubber tubing,
molded parts, extruded shapes, flexible, ozone resistant, and mechanically tough.
Class 1 - Tubing, expansion ratio 2, service temperature of -70 to 115C.
Class 2 - Molded parts and extruded shapes, expansion ratio 4, service temperature
range of -75 to 125C.
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3 and 4 of this
specification. This does not include documents cited in other sections of this specification or
recommended for additional information or as examples. While every effort has been made to
ensure the completeness of this list, document users are cautioned that they must meet all
specified requirements documents cited in sections 3 and 4 of this specification, whether or not
they are listed.
2.2 Government documents.
2.2.1 Specifications, standards and handbooks. The following specifications, standards, and
handbooks form a part of this document to the extent specified herein. Unless otherwise
specified, the issues of these documents are those cited in the solicitation or contract.
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business