MIL-PRF-46846D
3.5 Dimensions and tolerances (see table I).
3.5.1 Extruded tubing.
3.5.1.1 Sizes and tolerances. Unless otherwise specified (see 6.2), types II through VI
extruded tubing shall have the sizes and tolerances specified in table I, as supplied and after
heating (see 4.4.2.3.3).
3.5.1.2 Length. The length of tubing shall be as specified in the contract or order (see
6.2).
3.5.2 Molded parts and extruded shapes. The dimensions and tolerances of heat-
shrinkable molded parts and extruded shapes shall be as specified on the applicable drawings or
as specified in the contract or order (see 6.2).
3.5.3 Nonstandard dimensions.
3.5.3.1 Nonstandard thicknesses and shapes. Nonstandard thicknesses and shapes shall be
specified by the procuring activity. Dimensional tolerances for these nonstandard thicknesses or
shapes shall conform to the tolerances for the nearest standard size, unless otherwise specified
(see 6.2).
3.5.3.2 Length. If applicable, the length of tubing shall be as specified in the contract or
order (see 6.2).
3.5.4 Storage. The heat-shrinkable tubing, molded parts, and extruded shapes shall meet
the requirements of this specification after accelerated storage conditioning (see 4.3.1
and 4.3.2).
3.6 Physical, electrical, and chemical properties.
3.6.1 Tubing. Types II through VI, class 1, synthetic rubber tubing shall have the
physical, electrical, and chemical property requirements as specified in table II (see 4.4.2.1).
3.6.2 Molded parts and extruded shapes. Types I through VI, class 2, synthetic rubber
molded parts and extruded shapes, shall have the physical, electrical, and chemical property
requirements (see 4.4.2.2) as specified in table III.
5
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business