INCH-POUND
MIL-DTL-23053/7C
17 June 1996
SUPERSEDING
MIL-I-23053/7B
01 May 1986
DETAIL SPECIFICATION SHEET
INSULATION SLEEVING, ELECTRICAL, HEAT SHRINKABLE,
POLYETHYLENE TEREPHTHALATE, NON-CROSSLINKED
This specification is approved for use by all
Departments and Agencies of the Department of Defense.
The requirements for acquiring the sleeving described herein shall consist
of this specification sheet and the issue of the following specification
listed in that issue of the Department of Defense Index of Specifications
and Standards (DODISS) specified in the solicitation: MIL-DTL-23053
REQUIREMENTS:
Polymer type:
The base polymer used in formulating this sleeving shall be
polyethylene terephthalate.
Continuous operating temperature range:
-60°C (-76°F) to +135°C (+275°F).
Classification: T h e
heat
shrinkable
sleeving
shall
be
following classes, as specified (see 6.2a):
Class 1 - Single longitudinal seam, thermally bonded
Class 2 - Spirally wound, resin bonded
Color: The heat shrinkable sleeving shall be furnished in clear, as
manufactured. The acquiring activity may specify colors for Class 2 sleeving
only (see 6.2b). Colors shall conform to Class I of MIL-STD-104.
Longitudinal change:
Class 1: 30 percent maximum
Class 2: 35 percent maximum
Military part number: The military part number shall consist of the basic
number of this specification sheet and dash numbers as follows:
AMSC N/A
FSC 5970
DISTRIBUTION STATEMENT A, Approved for public release; distribution is unlimited.
1 of 6
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business