MIL-DTL-23053/7C
Construction details, inches (mm). 1/ - Continued
TABLE I.
Military
As supplied
After unrestricted shrinkage
part number 1/
ID minimum
ID maximum
Wall Thickness 2/
M23053/7-210-*
.187(4.75)
3/
.140(3.6)
M23053/7-211-*
.250(6.35)
.188(4.8)
M23053/7-212-*
.312(7.92)
.234(5.9)
M23053/7-213-*
.375(9.53)
.281(8.1)
M23053/7-214-*
.500(12.7)
.375(9.5)
M23053/7-215-*
.625(15.88)
.469(11.9)
M23053/7-216-*
.750(19.1)
.563(14.3)
M23053/7-217-*
1.000(25.4)
.750(19.1)
M23053/7-218-*
1.125(28.58)
.844(21.4)
M23053/7-219-*
1.250(31.75)
.938(23.8)
M23053/7-220-*
1.375(34.93)
1.032(26.2)
M23053/7-221-*
1.500(38.1)
1.125(28.6)
M23053/7-222-*
1.750(44.45)
1.313(33.4)
M23053/7-223-*
2.000(50.8)
1.500(38.1)
1/ Diameter limits for the object to be enclosed shall be no less than
85 percent of the as supplied diameter.
2/ Class 1 wall thickness measurements shall be made away from the seam.
3/ Because of irregular shrinkdown of Class 2 sleevings, wall thickness
shall be determined "as supplied" as follows:
Nominal ID
Wall thickness range
(as supplied)
(as supplied]
inch
(mm)
(mm)
inch
(.038
to
.102)
.015
to .061
(.381
to 1.55)
.0015
to
.004
.062
to .074
(1.57
to 1.88)
.0015
to
.005
(.038
to
.127)
.075
to .094
(.038
to
.152)
(1.91
to 2.39)
.0015
to
.006
(.038
to
.203)
.095
to .124
(2.41
to 3.15)
.0015
to
.008
.125
to 2.000
(3.18
to 50.8)
(.033
to
.254)
.0015
to
.010
The acquisition activity (see 6.2) may specify the exact wall thickness
required within each range.
3
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business