MIL-I-46865B (MI)
(Application for copies should be addressed to the American Society for
Testing and Materials, 1916 Race Street, Philadelphia, PA 19103.)
(Non-Government standards and other publications are normally available from the organizations that prepare or distribute the documents. These documents also may be available in or through libraries or other informational services.)
2.3 Order of precedence. In the event of a conflict between the text of this document and the references cited herein, the text of this document takes precedence. Nothing in this document, however, supersedes applicable laws and regulations unless a specific exemption has been obtained.
3. REQUIREMENTS
3.1 First article. When specified (see 6.2), a sample shall be subjected to first article inspection (see 6.3) in accordance with 4.4.
3.2 Materials.
3.2.1 Composition and condition in container (see 4.7.4.1).
3.2.1.1 Composition. The materials furnished under this specification shall be premixed, frozen, degassed compounds formulated from the ingredients specified in table I.
TABLE I. Material composition.
Ingredients |
Parts by weight Type I Type II Type III |
Epoxy resin I Epoxy resin II Amine curing agent Colloidal silica |
50 50 50 50 50 50 19.5 19.5 19.5 2.5 3.5 5.0 |
3.2.1.2 Condition in container. The compounds, as received, shall be free of gel particles, dirt, or any other contaminants which would affect the intended use.
3.2.2 Pot life. The useable pot life of the compounds shall be not less than 30 minutes (see 4.7.4.2).
3
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business