MIL-I-46865B (MI)
4.5.1 Sampling. Unless otherwise specified in the contract or order (see 6.2), sampling shall consist of a random sample selected from each production lot in accordance with table III and will be tested as specified in paragraph 4.5.3.
TABLE III. Sampling plan for quality conformance.
Lot size |
Sample size |
2 to 8 9 to 15 16 to 25 26 to 50 51 to 90 91 to 150 151 to 280 281 to 500 501 to 1200 1201 to 3200 3201 to 10,000 10,001 to 35,000 35,001 to 150,000 150,001 to 500,000 500,001 and over |
5 5 5 5 7 11 13 16 19 23 29 35 40 40 40 |
Accept on Zero and reject on 1 or more. |
|
4.5.2 Lot formation. A lot shall consist of all the material manufactured in one continuous operation by the same process by the same manufacturer in accordance
with this specification and submitted for inspection at one time.
4.5.3 Quality conformance inspection. Quality conformance inspection of the sample specified in 4.5.1, to determine compliance with the characteristics specified in Table IV, shall be conducted in accordance with the corresponding tests and inspection paragraphs.
TABLE IV. Quality conformance inspection.
Characteristic |
Requirement paragraph |
Test paragraph |
Composition and condition in container Porosity Hardness Workmanship |
3.2.1 3.3.1 3.3.2 3.4 |
4.7.4.1 4.7.4.5 4.7.4.6 4.9 |
7
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business